Autokent Mvci Multi Driver X64 Install May 2026

If the installer asks for the hardware type, select "Mini VCI" or "XHorse."

Open the (included in the Autokent pack) and click Device Info . If it shows the firmware version and "Connected," your installation is successful. 🚗 Step 6: Configuring Diagnostic Software Finally, point your software to the new driver. For Toyota Techstream: Open Techstream. Go to Setup > VIM Select . Select XHorse - MVCI from the drop-down menu. For Honda HDS: Go to F12 (Setup) . Select the Comms Interface as XHorse MVCI . ⚠️ Troubleshooting Common Issues

Plug your into a USB 2.0 port (USB 3.0 ports can sometimes cause timing issues). Open Device Manager (right-click Start > Device Manager). Look under Ports (COM & LPT) or USB Controllers . autokent mvci multi driver x64 install

Ensure your MVCI (Mini VCI) cable is unplugged until prompted.

Right-click the .exe installer and select . ⚙️ Step 2: Running the Multi Driver Installer If the installer asks for the hardware type,

Locate the file MVCI32.dll (found in the installation folder). Copy this file. Paste it into C:\Windows\SysWOW64 .

In some versions of the Autokent package, you must ensure the .dll files are in the correct system folders to be recognized by 64-bit Windows. For Toyota Techstream: Open Techstream

Windows 7, 8, 10, or 11 (64-bit versions).