Bg2-w09 Test Point Page

You will need the Huawei USB Serial Drivers or MediaTek VCOM drivers installed on your PC.

Once open, you will see the PCB (Printed Circuit Board). You may need to remove small metal brackets holding the battery and LCD connectors. bg2-w09 test point

Carefully separate the display module from the back casing using a thin prying tool. You will need the Huawei USB Serial Drivers

"Repair" firmware containing a scatter file and a working Download Agent (DA). Safety Warning Carefully separate the display module from the back

Specifically a Phillips 1.5 mm (PH000) for internal bolts. Tweezers: To short the test point pad to ground accurately.

The test point is typically a small, gold-plated copper pad on the motherboard. On the BG2-W09, this point must be shorted to Ground (GND) —often any metal shielding or a dedicated GND pad nearby—while connecting the USB cable to the PC.

Fixing corrupted partitions that cannot be accessed through standard Fastboot or Recovery modes. How to Access the BG2-W09 Test Point