Body Sculpture Bc 5700 Magnetic Bike Manual Fixed Now

Body Sculpture BC 5700 Magnetic Bike: The Ultimate Setup & Maintenance Guide

If you feel no change when turning the tension knob, the internal tension cable may have slipped. You will need to remove the plastic side shrouds to re-hook the cable to the magnetic brake assembly. Console Not Lighting Up

Attach the (usually featuring transport wheels) and the Rear Stabilizer to the main frame. Secure them using the carriage bolts, curved washers, and acorn nuts. Ensure they are tight to prevent rocking during high-intensity sprints. Step 2: Pedals The pedals are side-specific. Right Pedal (R): Thread clockwise into the right crank arm. Body Sculpture Bc 5700 Magnetic Bike Manual

If the bike begins to squeak, check the bolts on the stabilizers and pedals first. Over time, these can loosen. Applying a small amount of silicone lubricant to the seat post can also eliminate friction noise. Resistance Issues

Feed the pulse sensor wires through the handlebar post. Secure the handlebars with the T-knob. Finally, connect the monitor cables to the console and slide the console onto the bracket at the top of the post. 3. Operating the Console The BC 5700 features a user-friendly computer. Start pedaling or press any button. Mode Button: Toggle between metrics (Time, Speed, etc.). Body Sculpture BC 5700 Magnetic Bike: The Ultimate

Hold the mode button for 3 seconds to clear all data except the Odometer.

Keep your back straight and avoid locking your elbows. Secure them using the carriage bolts, curved washers,

Slide the seat post into the main frame and secure it with the adjustment knob. Attach the seat to the horizontal slider, allowing you to move the saddle forward or backward for the perfect "reach" to the handlebars. Step 4: Handlebars and Console