| Â Â Â |
 |
Align the current time with the (usually located at the 2 o'clock or 3 o'clock position on the inner face).
The timer follows the segments you have pushed down.
Be cautious when using the timer with high-draw appliances like large space heaters or air conditioners. Check the back of the device for the maximum Wattage (W) or Amperage (A) rating.
The 181 5 model is characterized by its circular "tripper" dial. Unlike digital timers that require programming through buttons and screens, the Diehl Multi Timer uses physical pins (segments) to determine "ON" and "OFF" cycles. 24-Hour Mechanical Plug-in Timer Switching Interval: Usually 15 or 30 minutes
The Diehl 181 5 uses small sliding segments (pins) around the edge of the dial.
Check that no segments are accidentally pushed down in the "OFF" zone and ensure the override switch is set to the "Clock" symbol.
Before setting your schedule, you must synchronize the timer with the actual time of day. Locate the center dial with the printed numbers (1–24).
Example: If it is 4:00 PM, rotate the dial until the number "16" aligns with the arrow. 3. Programming the ON/OFF Cycles
Align the current time with the (usually located at the 2 o'clock or 3 o'clock position on the inner face).
The timer follows the segments you have pushed down.
Be cautious when using the timer with high-draw appliances like large space heaters or air conditioners. Check the back of the device for the maximum Wattage (W) or Amperage (A) rating. diehl multi timer 181 5 manual
The 181 5 model is characterized by its circular "tripper" dial. Unlike digital timers that require programming through buttons and screens, the Diehl Multi Timer uses physical pins (segments) to determine "ON" and "OFF" cycles. 24-Hour Mechanical Plug-in Timer Switching Interval: Usually 15 or 30 minutes
The Diehl 181 5 uses small sliding segments (pins) around the edge of the dial. Align the current time with the (usually located
Check that no segments are accidentally pushed down in the "OFF" zone and ensure the override switch is set to the "Clock" symbol.
Before setting your schedule, you must synchronize the timer with the actual time of day. Locate the center dial with the printed numbers (1–24). Check the back of the device for the
Example: If it is 4:00 PM, rotate the dial until the number "16" aligns with the arrow. 3. Programming the ON/OFF Cycles
