Ipiella3 Manual May 2026
Before beginning the installation, verify that your components are compatible with the technical specifications:
VGA port, USB 2.0 ports, Ethernet (RJ-45), and standard audio jacks. 2. Pre-Installation Setup ipiella3 manual
Align the notch on your DDR3 RAM stick with the break in the slot. Before beginning the installation
SATA II (3.0 Gb/s) connectors for hard drives and SSDs. USB 2.0 ports
Connect the and the 4-pin (or 8-pin) CPU power cable from your PSU.
A standard Phillips-head screwdriver is typically the only tool needed for mounting.
If you have a dedicated GPU installed, ensure your VGA/HDMI cable is plugged into the card and not the motherboard's onboard VGA port. 5. Driver and BIOS Support