Ivoclar Programat P100 Manual English -

You can customize parameters such as holding temperature ( ), temperature increase rate ( ), and holding time ( ) via the menu buttons. 3. Temperature Calibration (Silver Test)

Turn on the power switch at the rear. The furnace performs a self-test before displaying the standby screen. Program Selection: Enter the desired Program Number ( ) using the keypad. Press START ( ivoclar programat p100 manual english

Connect the pump to the dedicated socket at the rear. It is highly recommended to use an original Ivoclar Vivadent vacuum pump to ensure compatibility with the furnace’s power consumption limits. You can customize parameters such as holding temperature

Secure the heater plug by rotating it 45° until it snaps into place, and ensure the thermocouple plug is inserted with correct polarity. 2. Operating Procedures The furnace performs a self-test before displaying the

The P100 uses a numeric keypad for selecting and editing programs.

Place the unit on a flat, level surface away from heaters or other heat sources. Ensure at least 110 mm of space behind the furnace for the swivel movement of the furnace head and adequate air circulation. Connections:

Verify that your local voltage matches the rating plate before connecting the supplied power cord.