Teknikdata DestekDestek Merkezi
Kurumsal Yardım Bilgi Bankası Lambert Lx 24 Fi Manual EnglishSepetim
Hesabım

🔔 🔔 🔔 Duyuru: 24. Yılımıza özel indirimler sizleri bekliyor ! Kampanya Kodu : TDATA2024 | Detaylı bilgi için tıklayınız.

Ping Atma

  1. Ana Sayfa
  2. Bilgi Bankası
  3. Lambert Lx 24 Fi Manual English
  4. Lambert Lx 24 Fi Manual English

Marked with a radiator icon; adjusts the temperature of the water flowing to your radiators.

Flame Sensing Error. The boiler detects a flame even when it shouldn't be there; this usually requires a technician. Maintenance and Safety

Low Water Pressure. The system pressure has dropped too low. Refill using the filling loop as described above.

Full electronic ignition with ionization flame control. Gas Type: Configurable for Natural Gas (G20) or LPG (G31). Water Protection: IPX5D electrical protection rating. Control Panel Overview

Shows current water temperature, system pressure (in bar), and error codes.

The front interface of the Lambert Lx 24 Fi is designed for simplicity. Most versions feature:

The boiler requires a specific water pressure to operate. Check the digital display or the analog gauge. It should sit between 1.0 and 1.5 bar when cold. If it falls below 0.5 bar, locate the filling loop (usually a black plastic handle underneath the boiler) and turn it slowly until the pressure reaches the 1.2 bar mark. 2. Summer vs. Winter Mode

Lambert Lx 24 Fi Manual English Here

Marked with a radiator icon; adjusts the temperature of the water flowing to your radiators.

Flame Sensing Error. The boiler detects a flame even when it shouldn't be there; this usually requires a technician. Maintenance and Safety Lambert Lx 24 Fi Manual English

Low Water Pressure. The system pressure has dropped too low. Refill using the filling loop as described above. Marked with a radiator icon; adjusts the temperature

Full electronic ignition with ionization flame control. Gas Type: Configurable for Natural Gas (G20) or LPG (G31). Water Protection: IPX5D electrical protection rating. Control Panel Overview Maintenance and Safety Low Water Pressure

Shows current water temperature, system pressure (in bar), and error codes.

The front interface of the Lambert Lx 24 Fi is designed for simplicity. Most versions feature:

The boiler requires a specific water pressure to operate. Check the digital display or the analog gauge. It should sit between 1.0 and 1.5 bar when cold. If it falls below 0.5 bar, locate the filling loop (usually a black plastic handle underneath the boiler) and turn it slowly until the pressure reaches the 1.2 bar mark. 2. Summer vs. Winter Mode