Insert the extension arm into the wall bracket. Attach the spring arm (Acrobat) to the extension arm. Caution: The spring arm is under high tension and should only be released once the weight of the Climazon head is attached.
Lift the Climazon head and align its mounting point with the top of the pedestal tube.
Align the tube vertically with the base plate. Insert it and tighten the locking screw from the underside of the base until the tube is firmly immobilized. Phase B: Mounting the Device Head wella climazon millenium manual install
Push the three swivel castors into the pre-drilled holes on the underside of the pedestal base until they click into place. Ensure they are secure to prevent the unit from tipping.
Use the integrated cable holder (standard on ST5 models) to secure the power cord, preventing tripping hazards during salon use. 3. Wall-Mounted Installation: Step-by-Step Insert the extension arm into the wall bracket
Align the mounting bracket and mark the drill holes. Insert heavy-duty wall anchors and secure the bracket with the provided high-tensile screws. Phase B: Attaching the Arm and Head
Never use the Climazon Millenium with older Wella pedestals (such as type ST3), as the device may fall and cause injury. Lift the Climazon head and align its mounting
For specific technical drawings or parts lists (like the S31 model), you can often find them on repositories like ManualsLib or Wella Professionals .