Xh-m608 Manual __hot__ -

Set a value from (minutes) to enable a timed charge or discharge session. 4. Advanced Functions & Troubleshooting ainow.inhttps://ainow.in XH M608 Battery Charge And Discharge Module - AINOW

The XH-M608 acts as an intelligent switch. It does not provide power itself; it controls the connection between a power source (charger) or a load and your battery.

Understanding the limits of your hardware is critical for preventing electrical failure. DC 6V to 40V. Display & Control Accuracy: 0.1V. Xh-m608 Manual

Relay stays closed only when the voltage is between the lower (P1) and upper (P2) limits.

The relay on the board should be placed "in-line" with one of the wires (typically the positive) of your charger or load. Set a value from (minutes) to enable a

Integrated voltmeter, undervoltage/overvoltage protection, and a timing discharge function. 2. Wiring Guide

The module uses a menu system (P0 to P3) to define its behavior. Use the button to navigate and the + / – buttons to adjust values. P0: Operating Mode Selection It does not provide power itself; it controls

Relay closes when voltage ≥ P2 (upper limit) and opens when voltage ≤ P1 (lower limit). Setting the Limits (P1 & P2)